The Finishing Disc for a Perfect, Swirl-Free Surface

Chasing Perfection in the Final Finish

Any painter knows the final result is only as good as the prep work that goes into it. When you get to the final sanding stages on a primer or an existing finish, consistency is everything. You need an abrasive that cuts just enough, but not too much, and leaves behind a scratch pattern so uniform that the topcoat will lay down like glass. That's precisely what the 188 Green Ceramic Film disc was built for.

The Secret is in the Coating

What makes this disc special isn't just the ceramic grain, but how it's applied. We use a special process to arrange the abrasive grains in a uniform, directional layout on the film backing. Why does that matter? It means the disc cuts with incredible predictability. There are no rogue, aggressive grains to cause deep scratches that will haunt you later. This gives you a level of control that's essential for delicate tasks like sanding primer before your color coat, or for carefully erasing small defects and imperfections in a finish.

Built for the Demands of the Paint Booth

This isn't a one-trick pony. The tough film backing means you can use it wet to keep dust down and achieve an even finer cut, or use it dry with a vacuum sander for speed and efficiency. It's a versatile and reliable tool designed for the critical final steps of the refinishing process. If you're looking for that perfect, flat, ready-to-paint surface, this is the disc you should be reaching for.